Egress Systems Pittsburgh, Pennsylvania
Essential Egress System Components
When homeowners decide to update their home or construct a new one, they will almost always add an Egress system to the entryway. An Egress system Pittsburgh, PA is an interior door system that helps to protect people from entering a house illegally. It does this by preventing people from simply stepping over the threshold of the door. It is also used to limit access to stairwells. There are four main components that make up an Egress system including:
Windows is often one of the primary elements of an Egress system. Windows serves as the doorway from an entryway into a home. Most windows have deadbolt locks so that when locked they cannot be kicked in too. There are many different types of window systems available such as bi-fold windows, casement windows, French windows, pocket windows, sliding windows, tinted glass, and others. They all have one primary purpose and that is to control the light entering the basement or other areas of the home.
Basement Egress Windows:
As mentioned above, these are used to limit access to the outside. This includes having an emergency exit should there be an emergency in the basement. Most basement egress windows are equipped with glass that will not allow any amount of light to come through making it nearly impossible for an intruder to use a flashlight to break in. The type of basement egress windows you need will depend on a few factors such as: whether it is an exterior or interior room, how many windows need to be opened, and whether they are located inside or outside of the house.
Exterior Egress Systems:
An exterior egress system can consist of simple steps or an automated system. When installed, the user simply slides a padlock through a slot and the stairwell. The user then has an access code that is printed on a label located near the padlock. In order to open the stairwell, a keypad is used. This type of system is often used in commercial buildings and as such, requires frequent replacement of locks.
Indoor Egress Systems:
Installing an indoor egress system is typically more difficult than a do-it-yourself project because of the many safety considerations involved. Indoor systems are generally less complicated than an exterior system. The most popular type of indoor system is a two-way window. The window opens with a simple push of a button. These systems are highly effective for an emergency exit in a basement, garage, or another area of the home that does not have an interior exit stair.
Commercial Basement Emergency Egress Systems:
Similar to the do-it-yourself home projects, commercial basement emergency egress systems are also quite involved and challenging. When installing this system, it is extremely important to follow the manufacturer's directions. Many manufacturers of these types of systems will provide installation manuals that must be followed. The reason why a manufacturer provides a manual is that these egress systems are used in commercial settings where multiple people need to use the same stairway at the same time. For example, if a fire breaks out in a restaurant, the aircrew must get down from their aircraft and enter the building via the same stairway as everyone else.
Pneumatic lifters and cable tie-downs
The final category includes pneumatic lifters and cable tie-downs. A pneumatic lifter is used when the user needs a temporary measure to hold a person up until help arrives. Cable tie-downs are critical components in an egress system because they prevent victims from being able to move out of the building after a catastrophic fire or other emergencies. While there are many different pneumatic lifters and cable tie-downs available, some of the most commonly used include:
All three of the categories listed above are critical pieces of equipment that must be installed correctly and installed properly according to the manufacturer's instructions. However, many companies also offer optional equipment that may be more appropriate for your project. For example, most commercial construction companies offer a smoke detection system that is linked to the plating system. These smoke detectors are linked to a control panel which is located on the second floor of the building. This control panel then sends an audible alarm to the monitoring center if smoke is detected.
If anything in your home needs repair or waterproofing, you can contact us to get a foundation inspection near me!